? semiconductor components industries, llc, 2006 may, 2006 ? rev. 4 publication order number: 2SC4081RT1/d 1 2SC4081RT1 general purpose amplifier transistor npn surface mount features ? moisture sensitivity level: 1 ? pb?free package is available maximum ratings (t a = 25 c) rating symbol value unit collector?base voltage v (br)cbo 60 vdc collector?emitter voltage v (br)ceo 50 vdc emitter?base voltage v (br)ebo 7.0 vdc collector current ? continuous i c 100 madc collector current ? peak i c(p) 200 madc thermal characteristics characteristic symbol max unit power dissipation p d 200 mw junction temperature t j 150 c storage temperature t stg ?55 to +150 c stresses exceeding maximum ratings may damage the device. maximum ratings are stress ratings only. functional operation above the recommended operating conditions is not implied. extended exposure to stresses above the recommended operating conditions may affect device reliability. electrical characteristics (t a = 25 c unless otherwise noted) characteristic symbol min max unit collector?emitter breakdown voltage (i c = 2.0 madc, i b = 0) v (br)ceo 50 ? vdc collector?base breakdown voltage (i c = 10 adc, i e = 0) v (br)cbo 60 ? vdc emitter?base breakdown voltage (i e = 10 adc, i c = 0) v (br)ebo 7.0 ? vdc collector?base cutoff current (v cb = 60 vdc, i e = 0) i cbo ? 0.1 adc collector?emitter cutoff current (v ce = 10 vdc, i b = 0) (v ce = 30 vdc, i b = 0) (v ce = 30 vdc, i b = 0, t a = 80 c) i ceo ? ? ? 0.1 2.0 1.0 adc adc madc dc current gain (note 1) (v ce = 6.0 vdc, i c = 2.0 madc) h fe 180 390 ? collector?emitter saturation voltage (i c = 100 madc, i b = 10 madc) v ce(sat) ? 0.5 vdc 1. pulse test: pulse width 300 s, d.c. 2%. sc?70 case 419 marking diagram 2 1 3 81 m collector 3 1 base 2 emitter device * package shipping ? ordering information 2SC4081RT1 sc?70 3000/tape & reel *the ?t1? suffix refers to a 7 inch reel. ?for information on tape and reel specifications, including part orientation and tape sizes, please refer to our t ape and reel packaging specification s brochure, brd8011/d. http://onsemi.com 2SC4081RT1g sc?70 (pb?free) 3000/tape & reel 81 = device code m = date code* = pb?free package 1 (note: microdot may be in either location) *date code orientation may vary depending upon manufacturing location.
2SC4081RT1 http://onsemi.com 2 package dimensions sc?70 (sot?323) case 419?04 issue m a a2 d e1 b e e a1 c l 3 12 notes: 1. dimensioning and tolerancing per ansi y14.5m, 1982. 2. controlling dimension: inch. 0.05 (0.002) 1.9 0.075 0.65 0.025 0.65 0.025 0.9 0.035 0.7 0.028 mm inches scale 10:1 *for additional information on our pb?free strategy and soldering details, please download the on semiconductor soldering and mounting techniques reference manual, solderrm/d. soldering footprint* h e dim a min nom max min millimeters 0.80 0.90 1.00 0.032 inches a1 0.00 0.05 0.10 0.000 a2 0.7 ref b 0.30 0.35 0.40 0.012 c 0.10 0.18 0.25 0.004 d 1.80 2.10 2.20 0.071 e 1.15 1.24 1.35 0.045 e 1.20 1.30 1.40 0.047 0.035 0.040 0.002 0.004 0.014 0.016 0.007 0.010 0.083 0.087 0.049 0.053 0.051 0.055 nom max l 2.00 2.10 2.40 0.079 0.083 0.095 h e e1 0.65 bsc 0.425 ref 0.028 ref 0.026 bsc 0.017 ref on semiconductor and are registered trademarks of semiconductor components industries, llc (scillc). scillc reserves the right to mak e changes without further notice to any products herein. scillc makes no warranty, r epresentation or guarantee regarding the suitability of its products for an y particular purpose, nor does scillc assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including wi thout limitation special, consequential or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/or specifications can and do vary in different application s and actual performance may vary over time. all operating parameters, including ?typicals? must be validated for each customer application by customer?s technical experts. scillc does not convey any license under its patent rights nor the rights of others. scillc products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the scillc product could create a sit uation where personal injury or death may occur. should buyer purchase or use scillc products for any such unintended or unauthorized application, buyer shall indemnify and hold scillc and its of ficers, employees, subsidiaries, af filiates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that scillc was negligent regarding the design or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws and is not for resale in any manner. publication ordering information n. american technical support : 800?282?9855 toll free usa/canada europe, middle east and africa technical support: phone: 421 33 790 2910 japan customer focus center phone: 81?3?5773?3850 2SC4081RT1/d literature fulfillment : literature distribution center for on semiconductor p.o. box 5163, denver, colorado 80217 usa phone : 303?675?2175 or 800?344?3860 toll free usa/canada fax : 303?675?2176 or 800?344?3867 toll free usa/canada email : orderlit@onsemi.com on semiconductor website : www.onsemi.com order literature : http://www.onsemi.com/orderlit for additional information, please contact your local sales representative
|
